您好,欢迎来到贵州AG8工程机械有限公司官网!

贵阳装载机

新闻分类

产品分类

联系AG8

公司名称:贵阳AG8工程机械有限公司


联系人:杨经理


手  机:15186981858

            

网  址:www.bastard-divine.com


邮箱:1721318949@qq.com


地  址:贵州省贵阳市观山湖区金华镇金华小学后面


贵州装载机浅谈正确操作农用装载机的方法

您的当前位置: 贵州装载机出租 >> 新闻中心 >> 公司新闻

贵州装载机浅谈正确操作农用装载机的方法

发布日期:2018-02-05 作者:贵州装载机 点击:

贵州装载机">贵州装载机浅谈正确操作农用装载机的方法

Guizhou loader on the correct operation of agricultural loader

贵州装载机

贵州装载机认为农用装载机是与农用拖拉机等设备配套,将地面松散的土、石铲起装入卡车或挂车的农业机械。一般用于推土、铲运、装载、抓取等作业。怎样正确操作农用装载机?

That is the agricultural loader and supporting agricultural tractors and other equipment Guiyang direct injection loader, the ground will loose soil, agricultural machinery into the shovel truck or trailer. It is generally used to push earth, shovel, load, grab and so on. How to operate the farm loader correctly?

1、要轻:在农用装载机作业时脚跟紧抵驾驶室地板,自吸泵脚板和油门踏板保持平行,轻缓地下压加油踏板。

1, should be light: in the farm loader operation, the heel is tight to the cab floor, the foot plate of the pump and the accelerator pedal are kept parallel, and the pedal of the refueling pedal is gently and gently underground.

2、要稳:农用装载机在作业中,油门始终要稳住。一般作业状态下,油门开度大约在70%左右为宜。

2, to be stable: the farm loader in the operation, the throttle should always be stable.  Under the general operating condition, the opening of the throttle is about 70%.

3、分离:在农用装载机作业时,脚板应和制动踏板分离开,平放到驾驶室地板上,决不能踩在制动踏板上。齿轮油泵装载机常常在凹凸不平的工地作业,如果脚总是踩在制动踏板上,机身上下窜动会造成驾驶员不轻意地踩制动踏板。一般情况下,要用控制油门减速的办法控制机况和换档。油桶泵这样既避免了频繁制动造成制动系统过热,又为装载机快捷的提速带来方便。

3, separation: in the farm loader operation, the foot board should be separated from the brake pedal, flat on the floor of the cab, and must not be stepped on the brake pedal. Gear oil pump loaders often work on uneven sites. If feet are always on the brake pedal, the upper and lower moving of the fuselage will cause the driver to step on the brake pedal lightly. In general, it is necessary to control the condition and shift of the engine by controlling the deceleration of the throttle. The oil bucket pump avoids the overheating of the brake system by frequent braking and brings convenience to the speed increase of the loader.

4、要勤:在农用装载机作业时,特别是在铲挖作业时,应在油门稳定情况下,用循环扳动起升和转斗操纵杆的方法使铲斗铲满物料。计量泵起升和转斗操纵杠的循环扳动就是所说的“勤”。这个过程非常重要,对耗油量的影响很大。

4, we must be diligent: during the operation of agricultural loaders, especially in shovel and digging operations, we should use the cycle to pull up the lifting and rotating bucket control rods under the condition of throttle stability, so that the bucket can be filled with materials. The cycle trigger of the metering pump lifting and the rotating bucket is said to be "diligent". This process is very important and has a great impact on the consumption of oil.

5、协调:协调就是起升和转斗操纵杠有机的配合。农用装载机一般的铲挖过程首先是将铲斗平放在地面,平稳地驶向料堆。泵在铲斗平行铲往料堆遇阻力时,首先应遵循先起臂后收斗的原则。这样可以有效地避免铲斗底部受到阻力,从而能够充分发挥最大的掘起力。

5, coordination: coordination is the organic coordination of lifting and turning control bars. The general shovel digging process of the agricultural loader first is to put the bucket on the ground and smoothly drive to the heap. When the pump meets the resistance of the bucket parallel shovel to the material heap, the first principle should be followed. It can effectively avoid the bucket bottom resistance, which can give full play to the maximum breakout force.

  


本文网址:http://www.bastard-divine.com/news/371.html

关键词:贵州装载机,贵阳装载机,贵州装载机公司

最近浏览:

  • 在线客服
  • 联系电话
    13885175275
  • 在线留言
  • 在线咨询
    欢迎给AG8留言
    请在此输入留言内容,AG8会尽快与您联系。
    姓名
    联系人
    电话
    座机/手机号码
    邮箱
    邮箱
    地址
    地址