As everyone knows the excavator work environment is usually very bad, but don't ignore these details or it will damage the excavator bucket, and then get the money. The underneath of the Guizhou direct - injection excavator below tells us all of the details that are usually ignored.
1, the machine work environment is usually very bad, in this environment, a lot of dust will fall into the engine around. In order to reduce the temperature of the engine, we need to clean up the sundries around the engine.
2, we also often check the heat fan and the tightness of the conveyer belt, which can cause the water temperature to rise and damage the dug.
3, for the cooler to ensure no sundries to shield, the engine surface as far as possible without oil pollution, these are factors that affect the heat dissipation.
4, we need to carry out routine maintenance of water tanks, too little water in the tank, or overflow of water in the tank, which are the phenomena we should avoid. These phenomena will damage the bucket.
5, to ensure that there is no dirt in the waterway. If dirt exists, the water flow will be reduced, and the water temperature increases and the bucket is damaged.
6, the oil in the engine should be guaranteed in the conventional range, otherwise the water temperature will increase and damage the dug.
7. When the weather is cold, a glycol type antifreeze should be added so that it can avoid volatilization.
8, computer controlled machines should also avoid the production of too large or too small oil.
9, we should also pay attention to the inspection of the integrity of the water tank cover, to avoid the phenomenon of water temperature rise.
10, we should make the engine work without exceeding the rated power to avoid the rise of water temperature.